Hitachi manual Inverter Configuration Parameters for the SJ-FB Board

						Chapter 5		SETTING
5.3 Inverter Configuration Parameters for the SJ-FB Board
								Setting	Change
Code			Function name		Setting range		Initial data		mode on
								on run
									run
A044	1st		control method		00(VC) / 01(VP1.7power) / 02(Free V/f Setting)		00	-	-
					/ 03(SLV) / 04(0Hz area SLV) / 05(V2)
H001	Auto-tuning			mode	00(NOR : Invalid) / 01(NRT : not rotate)/ 02(AUT :		00	-	-
	selection				rotate)
H002	1st		motor	constant	00(Hitachi standard motor constant)/		00	-	-
	selection				01(Auto-tuning data)/
					02(Auto tuning data with online auto-tuning)
H003	1st		motor	capacity	0.20 - 75.0(kW)		Setting on	-	-
	selection						forwarding
H004	1st		motor pole		2/4/6/8 (Poles)		4	-	-
	selection
H005	1st		motor	speed	0.001 - 9.999 / 10.00 - 65.53		1.590
	response setting
H006	1st		stabilized factor		0. - 255.		100.
	1st motor R1 setting						depends on
H020					0.000 - 9.999 / 10.00 - 65.53(Ω)		the motor	-	-
							capacity
	1st motor R2 setting						depends on
H021					0.000 - 9.999 / 10.00 - 65.53(Ω)		the motor	-	-
							capacity
	1st motor L setting						depends on
H022					0.00 - 99.99 / 100.0 - 655.35(mH)		the motor	-	-
							capacity
	1st motor I0 setting						depends on
H023					0.00 - 99.99 / 100.0 - 655.35(A)		the motor	-	-
							capacity
		st			0.000 - 9.999 / 10.00 - 99.99 /		depends on
H024	1		motor J setting				the motor	-	-
					100.0 - 9999.(kgm2)
							capacity
H030	1st		motor R1 setting		0.000 - 9.999 / 10.00 - 65.53(Ω)		depends on	-	-
	(Auto-tuning data)						the motor
							capacity
H031	1st		motor R2 setting		0.000 - 9.999 / 10.00 - 65.53(Ω)		depends on	-	-
	(Auto-tuning data)						the motor
							capacity
H032	1st		motor L setting		0.00 - 99.99 / 100.0 - 655.35(mH)		depends on	-	-
	(Auto-tuning data)						the motor
							capacity
H033	1st		motor I0setting		0.00 - 99.99 / 100.0 - 655.35(A)		depends on	-	-
	(Auto-tuning data)						the motor
							capacity

17