Chapter 5 SETTING
(Note 1) : Please refer to the instruction manual of the inverter main body as to the setting procedure.
(Note 2): When the over speed abnormal detection level (P026), the speed error over detection level (P027) are set 0, the Abnormal detection data processing will be invalid.
(Note 3): Regarding the
|
|
| Main body of SJ300 Production No (MFG No) (Note 4) | |
|
|
| 9 8 XXXXXXXXXXXX |
|
|
|
| 9 9 XXXXXXXXXXXX | others |
No. | Item | 9 O XXXXXXXXXXXX |
| |
9 J XXXXXXXXXXXX |
| |||
|
|
|
| |
|
|
| 9 K XXXXXXXXXXXX |
|
|
|
| 0 1 XXXXXXXXXXXX |
|
1 | Completion | Range of setting: 0.00 - 9.99 (X10(sec)) | Range of setting: 0.00 - 9.99 (X1(sec)) | |
| delay | time | (Example) In order to operate the completion | ( Example) In order to operate the completion |
| setting | for | delay time setting for orientation for 1(sec). Set | delay time setting for orientation for 1(sec). Set |
| orientation | P018 setting which is written below. | P018 setting which is written below. | |
| (P018) |
| P018=1(sec)/10(sec) =0.10 | P018=1(sec) / 1(sec)=1.00 |
2 | Over | speed | Range of setting: 0.0 - 150.0 (X100) | Range of setting: 0.0 - 150.0 (X1%) |
| abnormal | (Example) In order to operate the over speed | (Example) In order to operate the over speed | |
| detection | detection level at 66Hz while maximum | detection level at 66Hz, while maximum | |
| level |
| frequency is 60Hz. Set P026 setting which is | frequency is 60Hz. Set P026 setting which is |
|
|
| written below. | written below. |
|
|
| P026=66Hz / 60Hz=1.1 | P026=66Hz / 60HzX100=110.0 |
(Note 4) The SJ300 Production number (MFG No) is printed on the main body of the SJ300 specifications label. Refer to figure
Specifications label
Figure 5-2(1) location of specification labels
Inverter model
Maximum applicable motor
Input ratings
Output ratings
Production number
Figure 5-2 (2) Contents of specification label
19
