Hobart Welding Products 350LX manual Meters, Amperage Adjustment Control

4-7. Meters

1

2

1 Voltmeter

Voltmeter displays average voltage (to the nearest 0.1 V) at the weld output terminals.

2 Ammeter

Use meter to preset amperage. Me- ter displays average weld amper- age output of unit to nearest am- pere when welding.

4-8. Amperage Adjustment Control

	1 Amperage Adjustment Control
	Use control to adjust amperage,
(CE Nameplate Only)	and preset amperage on ammeter
1	(see Section 4-7). This control may
	be adjusted while welding.
1
	For remote amperage control,
	front panel control setting is the
	maximum amperage available. For
	example: If front panel control is set
	to 200 A, the range of the remote
	amperage control is 3 to 200 A.
	For pulse welding, use Amperage
	Adjust control to select from 3–400
	amps of peak amperage (see Sec-
	tion 4-12).
	For spot welding, use Amperage
	Adjust control to select from 3–400
	amps of peak amperage (see Sec-
	tion 4-15).

OM-356 Page 24