Hobart Welding Products 350LX manual Sequence Selection Switch

4-15. Sequence Selection Switch

(CE Nameplate Only)

1

1

1 Sequence Selection Switch

Switch controls Off, Start, Cra- ter, Start/Crater, 4t, and Spot functions. Place switch in de- sired position.

Off– Place switch in Off position when Sequence Selection func- tions are not desired.

4-16. Start Time/Spot Time Control And Start Current Control

(CE Nameplate Only) 1 Sequence Selection Switch

1

2

	Place switch in Start position.
	2 Start Time/Spot Time Control
1	Use control to select 0–15 seconds
	of start time.
	3 Start Current Control
	Use start control to select a starting
	current (3–400 amps) that is differ-
	ent from the weld current. Note:
	Start current can be used with or
	without a remote control.
	Application:
	Start current can be used while
	GTAW welding to assist in preheat-
	ing cold material prior to depositing
	filler material, or to ensure a soft
2	start. Start current can also be used
	for SMAW to ensure a more consis-

tent arc strike.

3 3

OM-356 Page 29