USER FUNCTIONS
Ready To Arm | |
Name | 01 |
Type | Action |
Trigger Output | None |
Start Zone Type | Stop Zone Type |
Not Used | Not Used |
Start System Operation | Stop System Operation |
Not Used | Save |
Not Used | |
| |
Programming Devices
8.Select “Action”. Dependant upon the Type selected previously, the system scrolls between several options:
None Permanent On On for 2 sec Pulsing Send
9.Select “Start Zone Type”. The system displays
the following options:
Not Used | Entry Exit 1 |
Entry Exit 2 | Perimeter |
Interior Follower | Day/Night |
24 Hour Silent | 24 Hour Audible |
Use the “S” “T” buttons to scroll to second page of zone type options.
Silent Burglary | 24 Hour Auxiliary |
Interior With Delay | Fire No Verification |
Carbon Monoxide | Trouble |
No Response | Arm Stay |
Use the “S” “T” buttons to scroll to third page of zone type options.
Arm Away | Disarm |
Monitor | Resident Monitor |
Resident Response | General Monitor |
General Response |
|
10.Select “Stop Zone Type”. The system displays the same options as step 9.
11.Select “Start System Operation”. The system
displays the following options:
Not Used | Arm Stay |
Arm Away | Disarm |
Any Burglary Alarm | Any Fire Alarm |
Bell Timeout | End of Exit Delay |
Use the “S” “T” buttons to scroll to second page of zone type options.
Start of Entry Delay | Chime |
Kissoff | Bypass |
System Low Battery | Reporter Failure |
Duress Alarm |
|
12.Select “Stop System Operation”. The system
displays the same options as step 11.
Use the “S” “T” buttons to scroll to second page of options.
– 47 –
