Honeywell 800-06894 manual System Functions, Testing the System to be conducted weekly, Test Mode

SYSTEM FUNCTIONS

Testing the System (to be conducted weekly)

Test Mode

The Test mode allows each protection point to be checked for proper operation. When the Walk Test mode is active, the control sounds a single beep every 30 seconds as a reminder that the system is in the Test mode.

NOTE: An alarm message will not be sent to your alarm monitoring company during these tests.

Entering Test Mode

Disarm the system and close all protected windows, doors, etc. The “READY” indicator should be lit.

Testing the System

Ready To Arm

			Tools
Arm Away	Arm Stay		Settings
Delay	10:18 AM June 8, 2010		Back
			5000-100-007-V0
	Ready To Arm
Program the system		2	3
	1
Enter Code:
	4	5	6
	7	8	9
Cancel	Clear	0
			5000-100-009-V0

1.With the system in the disarmed state, select the “Tools” icon from the second page of the Home Screen. The system displays the Keypad screen.

2.Enter your 4-digit Master User Code. The system displays the Master User programming screen.

	Ready To Arm
Users	Devices	Schedules	Test
Date Time	Events	Reminders	Slide Show
			Back
			5000-100-070-V0

3.Select the “Test” icon. The system displays the Test screen.

– 63 –