Honeywell 800-06894 manual Scheduling User Interface, Editing a Scheduled Function, User Functions

USER FUNCTIONS

Ready To Arm

1	2	3
4	5	6
Enter Time
10:21 AM	8	9
7
AM / PM	0	Done
Clear

5000-100-147-V0

Editing a Scheduled Function

	Ready To Arm
Auto Arm	-Auto Stay	-Daily
Edit	Add New	Delete
		5000-100-179-V0

Scheduling User Interface

10.If Auto Stay is selected, select “Clear” then enter a 4-digit time on the displayed keypad then select “Save”. If “Output” is selected proceed to Step 11. If “Disarm Notification” is selected proceed to Step 12.

11.Select a Device (Device 1 through Device 16).

12.Enter a Start Time and End Time on the displayed keypad then select “Save”.

1.At the Schedules screen, select the Schedule you wish to edit.

2.Select the “Edit” button. The Schedule programming screen will appear. Follow the steps as noted above in the programming a Scheduled Function section to edit and save your changes.

Deleting a Scheduled Function

	Ready To Arm
Auto Arm	-Auto Stay	-Daily
Edit	Add New	Delete
		5000-100-179-V0

1.At the Schedules screen, select the Schedule you wish to delete.

2.Select the “Delete” button. A confirmation screen will be displayed. Select “Yes” to confirm the deletion.

3.Select the “2” button. The system returns to the Master User programming screen.

– 51 –