Honeywell 800-06894 manual Clock/Calendar, Setting the date and time

USER FUNCTIONS

Clock/Calendar

Note: If your system is equipped with a GSMVLP5 or ILP5 Communication Module, the time and date will be programmed and updated automatically via Central Station. You may still program the correct Time Zone as shown below. Check with your installer to see if your system is equipped with a Communications Module.

Setting the date and time

Ready To Arm

			Tools
Arm Away	Arm Stay		Settings
Delay	10:18 AM June 8, 2010		Back
			5000-100-007-V0
	Ready To Arm
Program the system		2	3
	1
Enter Code:
	4	5	6
	7	8	9
Cancel	Clear	0
			5000-100-009-V0

Note: The system must be disarmed in order to set the date and time.

1.With the system in the disarmed state, select the “Tools” icon from the second page of the Home Screen. The system displays the Keypad screen.

2.Enter your 4-digit Master User Code. The system displays the Master User programming screen.

	Ready To Arm
Users	Devices	Schedules	Test
Date Time	Events	Reminders	Slide Show
			Back
			5000-100-070-V0

3.Select the “Date Time” icon. The Calendar screen will appear.

– 42 –