Honeywell 800-06894 manual SYSTEM OVERVIEW Touchscreen Controls Definitions, LED Meanings

Models: 800-06894

1 80
Download 80 pages 56.72 Kb
Page 12
Image 12
SYSTEM OVERVIEW

SYSTEM OVERVIEW

Touchscreen Controls Definitions

5.OFF (Disarm) KEY: Initiates the disarm process and causes a keypad to be displayed on the touchscreen. Disarms the burglary portion of the system, silences alarms and audible trouble indicators, and clears alarm trouble display after the problem has been corrected.

6.AWAY KEY: Completely arms both perimeter and interior burglary protection for backup protection by sensing an intruder's movements through protected interior areas as well as guarding protected doors, windows, etc. Entrance can be made through an entry delay zone without causing an alarm if the system is disarmed before the entry delay time expires.

7.PANIC Key: When depressed for 4 seconds, the virtual panic icons are displayed on the touchscreen.

8.MICROPHONE: Used to record personal messages via the Message Center, and for two- way voice and speaker phone operation.

9.ARMED Indicator (LED): (RED) Lit when the system has been armed (STAY, AWAY). Blinks when armed and fault exists, or once per second when AVM (VOX or Talk) or speaker phone mode is active.

LED Meanings

ARMED LED:

ON = System armed

(Red)

OFF = System disarmed

 

Blinking = System armed, and an alarm is in progress or was previously.

 

Blinking alternately with READY LED = speaker phone mode is active

READY LED:

ON = System disarmed, ready to arm

(Green)

OFF = System armed

 

Blinking = System disarmed, not ready to arm (a fault exists)

 

Blinking alternately with ARMED LED = speaker phone mode is active.

– 12 –

Page 12
Image 12
Honeywell 800-06894 manual SYSTEM OVERVIEW Touchscreen Controls Definitions, LED Meanings