FIRE/CO ALARM SYSTEM
Emergency Evacuation
UL | LYNX Touch is not intended for UL985 Household Fire applications unless a |
backup battery (P/N | |
|
|
Establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the National Fire Protection Association:
1.Position your detector or your interior and/or exterior sounders so that they can be heard by all occupants.
2.Determine two means of escape from each room. One path of escape should lead to the door that permits normal exit from the building. The other should be an alternative escape, such as a window, should your path to that door be unpassable. Station an escape ladder at such windows if there is a long drop to the ground.
3.Sketch a floor plan of the building. Show windows, doors, stairs and rooftops that can be used to escape. Indicate escape routes for each room. Keep these routes free from obstruction and post copies of the escape routes in every room.
4.Assure that all bedroom doors are shut while you are asleep. This will prevent deadly smoke from entering while you escape.
5.Try the door. If the door is hot, check your alternate escape route. If the door is cool, open it cautiously. Be prepared to slam the door if smoke or heat rushes in.
6.When smoke is present, crawl on the ground. Do not walk upright, since smoke rises and may overcome you. Clearer air is near the floor.
7.Escape quickly; don't panic.
8.Establish a place outdoors, away from your house, where everyone can meet and then take steps to contact the authorities and account for those missing. Choose someone to assure that nobody returns to the house — many die going back.
| CLOSETBEDROOM |
| |
PORCH | BEDR | BATH | BEDROOM |
| |||
2ND FLOOR
KITCHEN | BEDROOM |
BACK DOOR |
|
BEDROOM BATH | |
1ST FLOOR | |
• |
• |
BACK |
• |
FRONT |
emerevac |
