Installing the Honeywell IP Utility and Web-Client Software

Interfacing with the EQUIP Device Via a Network Video Recorder

Your HD3MDIH/X camera supports the PSIA specification for interoperability between network video products. There is no support for legacy EQUIP and EQUIP2 protocols.

For further information, refer to the documentation supplied with your NVR or contact your NVR network administrator.

Step 5: Launch the Web-Client to View Live Video

Note Only one user, an Administrator or a Guest, can log on to the Web-Client application at one time. After you are logged on as an Administrator, there is no time out until you click Logout. To allow other Administrators to log on, you must log out when the session is done.

Note After the IP Utility software is installed for the first time, you can change the

Administrator or Guest passwords and upgrade firmware.

Note It is important to click Apply in order to save any configuration change.

1.Log onto the Web-Client. There are two ways to launch the Web-Client and log on— via the Honeywell IP Utility Program or directly from Internet Explorer.

Honeywell IP Utility

a.Log onto the Honeywell IP Utility program.

b.From the Discovery pane, click to select the device to launch its browser.

c.To enable or disable the HTTP server, select or clear the Enable HTTP Server check box. By default, the HTTP server is enabled.

d.From the System tab, click Launch Browser.

The Web-Client application for the selected device opens in Internet Explorer.

Internet Explorer

From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the

Address bar to open the logon window.

2.Select a User Name and enter a Password.

a. From the User Name drop-down list, select Administrator or Guest.

38