HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Connecting to a Video Monitor

The local video out (see Figure 2-7) is available as a test output and should be used as needed during installation to position, aim, and focus the camera. Use the provided BNC connector to connect the video from the camera to the video input connector on your video monitor.

Note If your installation involves a 24V AC power source, then please wait approximately 60 seconds after connecting to a power source for video to appear on the local video out.

Connecting to a Network via an RJ-45 Ethernet Connector

The main video connection for your HD3MDIH/X camera will be made through your Ethernet network connection. Connect the Ethernet connector on your camera to your network using an Ethernet (10Base-T, 100Base-TX) cable.

Note You can connect your camera to a network or use any type of CAT5 cable to connect it directly to a PC or laptop.

Document 800-07361 Rev A

23

12/10