HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Adjusting the Lens Focus

Lenses are pre-focused at the factory. They might require a final adjustment after installation because the optical effect of the dome bubble might cause a slight defocusing of the lens.

TECH TIP! To check the focus, hold the dome bubble over the lens while making any adjustments.

To adjust the camera direction, view angle, and focus, connect the local video out to the video monitor using the supplied BNC video cable.

Securing the Enclosure Cover

Install the dome bubble when you have set up your camera and completed the network connections (see Chapter 3, Installing the Honeywell IP Utility and Web-Client Software).

Place the enclosure cover on the camera with the tabs to the left of the slots, then turn it clockwise until the tabs click securely into place.

Figure 2-9 Installing the Enclosure Cover

Document 800-07361 Rev A

27

12/10