HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Step 4: Connect to a Device and Configure Network Settings

When you log on to the IP Utility, the devices on the network—including the devices on other subnets—are automatically discovered and are listed in the Discovery pane. After the initial discovery, auto-refresh continues to discover devices that are newly added to the network.

You can also manually refresh the device discovery by clicking the Discovery icon (

),

located near the top of the Discovery pane.

 

Connecting to or Disconnecting From Devices

Before configuring the IP network settings, you must connect to the IP device.

Connecting to a Device

You can connect to individual Web-Client applications for each discovered device.

•In the Discovery pane, double-click the device to which you want to connect.

-OR-

 

• Select the device and click the Connect

button.

The network settings for the connected device are displayed in the System pane.

Disconnecting from a Device

In the Discovery pane, select the device and click Disconnect .

Note If you disconnect the device without saving configuration details, a warning dialog box displays. Click Yes to save and disconnect, or click Cancel to discard the changes and disconnect the device.

Configuring the IP Network Settings Automatically or Manually

Note When you see the Limited/No connectivity button, you cannot fully connect to the device because the discovered device is on a different subnet from your PC. Check your network settings for both the device and your PC to resolve this issue. Consult your network administrator for additional support.

Document 800-07361 Rev A

35

12/10