Installation and Setup
Mounting the Camera
Surface Mount
1.Secure the skirt to the ceiling (hardware not supplied) or to the wall using the supplied screws.
Note You must use screws that are able to support at least three times the weight of the camera.
2.Connect the wires (see Connecting the Wires on page 19).
3.Rotate and align the camera assembly yellow label with the skirt yellow label.
4.Secure the camera assembly to the skirt by pushing it into the skirt, then twisting it clockwise until it clicks securely in place.
5.Secure the camera assembly to the skirt by twisting it clockwise until it clicks securely in place.
Skirt
Screws (supplied)
Camera assembly
Turret
Dome bubble
6.Adjust the camera’s field of view (see Adjusting the Camera FOV (Field of View) on page 25).
7.Install the turret by clicking it into place.
8.Install the bubble by placing it on the camera with the tabs to the left of the slots, then turning it clockwise until the tabs click securely into place.
24