HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Navigating the Web-Client User Interface

Figure 4-2 Web-Client Window Layout: Administrator Log On

The URL corresponds to the IP Address as configured in the IP Utility.

Click Logout to exit the program. Confirm the user type logged in.

If logged on as a Guest, only the Live View tab is available. Administrators can access all tabs.

The image from your HD3MDIH/X camera displays on every tab.

Click the tabs to access the available configurations and settings.

SnapShot

Each tab has a section for configuration and/or navigation controls.

The Web-Client application user interface consists of multiple user-friendly views organized by function. Access to the views is user-controlled.

Table 4-2 Tabs/Views in the Web-Client Application

Tab

Enables you to...

 

 

Live View

View video and take SnapShots.

 

 

Device Settings

View the network settings and firmware details of the camera.

 

Restore to factory defaults and reboot a camera.

 

 

Compression

Configure the compression.

Settings

Set the maximum bit rate and/or target bit rate that the camera will

 

 

provide across the network based on priority mode settings. This

 

value is the threshold that you do not want the bit rate to exceed.

 

View received bit rate and frame rate statistics of the current image

 

in real time.

 

 

Camera Setup

Configure auto exposure and white balance for the camera.

 

 

Video Analytics

Configure the camera sabotage detection settings and view video

 

display.

 

 

IO and Audio

Configure the alarm and audio settings.

 

 

Document 800-07361 Rev A

47

12/10