HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Figure 4-13 Video Analytics Alarm Message

Configuring Video Blur Detection

The video appears blurred when the camera is exposed to elements such as water. When this occurs, video blurring in the field of view is detected and an alarm message appears (see Figure 4-13) above the video display. To detect video blurring:

1.Click the Video Analytics tab.

2.In the Blur Threshold list, select one of the following options:

Table 4-7 Blur Threshold Values

 

Value

To detect …

 

 

 

 

High (80%)

Maximum video blurring. The alarm message appears when

 

 

the video display is blurred by 80% or more.

 

 

 

 

Medium (50%)

Medium video blurring. The alarm message appears when

 

 

the video display is blurred by 50% or more.

 

 

 

 

Low (30%)

Minimum video blurring. The alarm message appears when

 

 

the video display is blurred by 30% or more.

 

 

 

3. Click Apply.

 

Note To turn off video blur detection, select Disable in the Blur Threshold list. Disable is the default value.

Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply.

Configuring Camera Blinding Detection

An obstacle in front of the camera lens can blind the camera. When this occurs, camera blinding is detected and an alarm message appears above the video display (see Figure 4-13). To detect camera blinding:

1.Click the Video Analytics tab.

Document 800-07361 Rev A

59

12/10