3

Installing the Honeywell IP Utility and Web-Client Software

This chapter describes how to:

•Install and log onto the IP Utility

•Connect to a device and configure network settings using the IP Utility

•Launch the Web-Client software

•Uninstall the IP Utility, Bonjour, or ActiveX software

About the Honeywell IP Utility and Web-Client

About the Honeywell IP Utility

The Honeywell IP Utility is a software application that is installed from a CD or downloaded from the Honeywell Systems Group website (www.honeywellvideo.com). It is installed on a local workstation and primarily used by Administrators to configure the EQUIP Series of products residing on an IP network.

The IP Utility enables users to:

•Discover device(s) on a network

•Configure the IP network settings, name device(s), upgrade firmware, change passwords.

•Open individual Web-Client applications for each discovered device.

Note Before installing and using the Honeywell IP Utility, confirm that your HD3MDIH/X camera is connected to the network through an Ethernet cable (see Connecting to a Network via an RJ-45 Ethernet Connector on page 23).

Document 800-07361 Rev A

29

12/10