IP Camera Web-Client

3.Click Apply. Adjustments in your compression settings are captured in the statistics. As you make adjustments, the Statistics field acts as a visual reminder of how your settings affect the bit rate, frame rate, and bandwidth usage.

4.When you are satisfied with your settings — that is, that the image quality and bandwidth usage meets your requirements — click Apply to save your settings. Settings are not saved unless you click Apply.

Statistics: Received Bit Rate and Frame Rate

To view in real time the received bit rate and frame rate statistics of the current image:

1.Click the Compression Settings tab.

2.In the Statistics area, select the Received check box. Deselecting the check box disables the refresh rate.

Note The Received check box is disabled by default. When you log out, this check box reverts to the disabled state.

Camera Setup

The Camera Setup view provides access to the settings used to configure the camera configurations for both Primary and Secondary streams. The following section explains Auto Exposure and White Balance setup.

Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply.

54