6.Remove the Spout Cover and, the black Ice Dispensing Spout and the Water Dispensing Nozzle. See Fig. 16.
Fig. 16
7)Immerse the parts removed in the above steps 2) through 6) in the cleaning and sanitizing solution for about 15 minutes each.
8)Rinse these parts thoroughly with clean water.
9)Wipe thoroughly the Shutter located above the Ice Dispensing Spout.
10)Reassemble the Bin Control Bracket Assembly.
11)Place the Dispensing Auger and Agitator, Bin Control Bracket Assembly,
12)Pour warm water into the Storage Bin to melt the ice produced from the cleaning and sanitizing solution.
13)Clean the storage bin liner, and rinse thoroughly.
14)Place the Front Cover of the Storage Bin, the Top Panel and the Front Panel back in position.
31
