Hoshizaki FD-1001MWH(-C), FD-1001MRH(-C), FD-1001MLH(-C), FD-1001MAH(-C) instruction manual Contents

IMPORTANT

This manual should be read carefully before the icemaker is installed and operated. Only qualified service technicians should install, service, and maintain the icemaker. Read the warnings contained in this booklet carefully as they give important information regarding safety. Please retain this booklet for any further reference that may be necessary.

	CONTENTS
Important Safety Information		5
I. Specifications		6
A. Nameplate Rating		6
1.	FD-1001MAH(-C) (air-cooled)	6
2.	FD-1001MWH(-C) (water-cooled)	7
3.	FD-1001MRH(-C) (remote air-cooled)	8
4.	FD-1001MLH(-C) (low-side, parallel rack system)	9
B. Dimensions / Connections		10
1.	FD-1001MAH(-C) (air-cooled)	10
2.	FD-1001MWH(-C) (water-cooled)	11
3.	FD-1001MRH(-C) (remote air-cooled)	12
4.	FD-1001MLH(-C) (low side, parallel rack system)	13
II. Installation and Operating Instructions		14
A. Checks Before Installation		14
B. How to Remove Panels		14
C. Location		15
D. Setup		15
E. Electrical Connection		16
F. Installation of Remote Condenser Unit		17
1.	Checks Before Installation	17
2.	Location	17
3.	Setup	18
4.	Line Set	18
5.	Electrical Connection	21
6.	Stacking Remote Condenser Units	22
G. Connection to an R-404A Parallel Rack System		23
1.	Line Set Installation	23
H. Water Supply and Drain Connections		26
1.	Icemaker	27
2.	Water-Cooled Condenser	28
I. Final Checklist		30
J. Startup		31
K. Bin Control Check		32
1.	Infrared Sensor Check	32
2.	Mechanical Backup Bin Control Check	34
3.	Infrared Sensor Shutdown Delay	35