Hoshizaki FD-1001MWH(-C), FD-1001MRH(-C) FD-1001MAH-C FD-1001MRH-C FD-1001MLH-C, Icemaker

1. Icemaker

•If you would like to convert to top water supply, install the optional Top Water Supply Kit (HS-2123).

•Icemaker water supply inlet is 1/2" female pipe thread (FPT). A minimum of 3/8" OD copper tubing is recommended for the icemaker water supply line.

•An icemaker water supply line shut-off valve and drain valve should be installed.

•Icemaker drain outlet is 3/4" FPT. A minimum of 3/4" OD hard pipe is recommended for the icemaker drain line.

FD-1001MAH(-C) FD-1001MRH(-C) FD-1001MLH(-C)

To convert to top water supply, install the optional Top Water Supply Kit (HS-2123).

Icemaker

Icemaker Water

Supply Line

Shut-Off Valve

Icemaker Water

Supply Inlet

1/2" FPT

Separate piping to approved drain. Leave a 2-inch (5-cm) vertical air gap between the end of each pipe and the drain.

2-inch

(5‑cm) air gap

Icemaker Water	Icemaker
Supply Line
	Drain Outlet
Drain Valve
	3/4" FPT
	Storage Bin
Bin Drain Outlet
3/4" FPT

Drain Floor

Fig. 14

27