HotBrick Network Solutions
Set Options
NetBIOS Broadcast- This is used to forward NetBIOS broadcast across the Internet. Auto Trigger–This is help to keep up the IPSec connection tunnel. It can be re-established immediately, if a connection is dropped and detected. Anti Replay – It ensures to keep track of IP packet-level security in order. Passive mode – This means that your PC establishes the data connection. If you enable passive mode. Check ESP Pad – If enable ESP(Encapsulating Security Payload),it will check ESP padding. Allow Full ECN – Enable will allow full Explicit Congestion Notification (ECN). ECN is a standard proposed by the IETF that will cut down on network congestion and routers dropping packets. Copy DF Flag – When an IP packet is encapsulated as payload inside another IP packet, some of the outer header fields can be newly written, and others are determined by the inner header. Among these fields is the IP DF (don't fragment) flag. When the inner packet DF flag is clear, the outer packet may copy it or set it; however, when the inner DF flag is set, the outer header MUST copy it. Set DF Flag- If this DF (Do not Fragment) flag is set, it means the fragmentation of this packet at the IP level is not permitted.
