HotBrick Network Solutions
Syslog Configuration Syslog Delivery
Sending out – Check this, if you want to send syslog messages to other
machine.
Keep Send messages – Check this, if you want to keep sent messages,
otherwise the sent message will be delete.
Syslog Server - IP address: Up to 3 syslog servers can be used.Enable:
You can enable or disable each server temporarily. Port: If your syslog
server does not use the default port, you can change it.
Log Priority For
Modules The syslog messages are divided into 8 levels, from Emergency to Debug
level. The lower level, the less messages will be generated. Emergency is
the lowest priority level, and Debug is the highest one.
SNTP Configuration Time Zone – You can setup system up time using SNTP ( Simple Network
Time Protocol), and there are 3 SNTP server that you can define on the
SNTP configuration.
Page 65