HP 1050 Junk Fax Empty, Junk Fax Full, Load Document, Memory Full, Cartridge New Fax Received

LCD error messages

Display	Status/Solution
Junk Fax Empty	You attempted to delete a junk fax number when there is no
	junk fax number.
Junk Fax Full	The machine can hold only 20 junk fax numbers.
Load Document	You must load a document before preceding.
Memory Full	Memory has become full while receiving a fax. It will not
	answer the telephone until memory has been cleared. Print any
	faxes stored in memory and, if necessary, clear scheduled jobs
	See Reprinting faxes on page 52 and see Clearing memory on
	page 53.

Memory Full

Press Start/Enter to continue

Memory has become full while scanning a document. Press Start/Enter to send or copy the scanned pages only. To cancel the job press Cancel and try again when memory becomes available, or split the new document into smaller parts. See Clearing memory on page 53.

Memory Received The machine has data stored in memory. Replace the print Ink Low. Install cartridge with new one in order to print the faxes.

new ink cartridge

Memory Received

Load paper and press Start/Enter

Load paper and press Start/Enter. There might be a jam. Clear the jam as described in Paper jams during printing on

page 58.

Memory Received	There is no print cartridge in the machine. Install a print
Install ink	cartridge.
cartridge
New Fax Received	The machine is low on ink and has received faxes into memory.
	You must replace the print cartridge (see Replace the print
	cartridge on page 56.) and reprint the faxes from memory (see
	Reprinting faxes on page 52.).
No answer from	The other machine has not answered after all redial attempts to
remote fax	send a fax.
No CID Number	The machine could not detect the CID (Caller ID) number.
No Dial Number	There is no number in the redial memory.
Not Found	The number you are searching for does not exist in memory.
Number already	The number you are trying to enter already exists in the phone
registered	book or junk fax list.

Number Not Assigned There is no number assigned to this One-Touch or two-digit Speed number.

Care and maintenance 64