Section 3: The Memory Stack, LAST X, and Data Storage 43

The above are stack lift-enabling operations, so the number remaining in the X-register can be used for subsequent calculations. If you address a nonexistent register, the display will show Error 3.

Example: Springtime is coming and you want to keep track of 24 crocuses planted in your garden. Store the number of crocuses blooming the first day and add to this the number of new blooms the second day.

Keystrokes

Display

 

3 O 0

3.0000

Stores the number of first-day

 

 

blooms in R0.

Turn the calculator off. Next day, turn it back on again.

l0

3.0000

5 +

8.0000

Recalls the number of crocuses that bloomed yesterday.

Adds today's new blooms to get the total blooming crocuses.

Clearing Data Storage Registers

Pressing ´ CLEAR Q (clear registers) clears the contents of all data storage registers to zero. (It does not affect the stack or the LAST X register.) To clear a single data storage register, store zero in that register. Resetting Continuous Memory clears all registers and the stack.

Storage and Recall Arithmetic

Storage Arithmetic. Suppose you not only wanted to store a number, but perform arithmetic with it and store the result in the same register. You can do this directly – without using l– by using the following procedure.

1.Have your second operand (besides the one in storage) in the display (as the result of a calculation, a recall, or keying in).

2.Press O.

3.Press +, -, *, or ÷.

4.Key in the register address (0 to 9, .0 to .9). (The Index register, discussed in section 10, can also be used.)

Page 43
Image 43
HP 15c Scientific manual Clearing Data Storage Registers, Storage and Recall Arithmetic