HP 16V Cause:, Cause:, Cause:, Cause:, Cause:, Cause:, Cause:, Cause:, Cause:, Solution:, Solution:, Solution:, Solution:, Solution:, Solution:, Solution:

Error Indications

Message Causes and solutions

MOTOR FAILURE n Cause: Malfunction in the feed motor, etc. Solution: If the error recurs, consult your dealer for service.

NO PROCESS UNIT Cause: No print unit is installed. Solution: Install the print unit.

OVERRUN ERROR Cause: Incomplete in extracting compressed data

Solution: Press the button.

PAPER JAMn Cause: Paper jam in the specified position Solution: Clear the jammed paper from the following area:

0:Pick roller, 1: Entry to paper path

2:Paper path, 3: Ejection from paper path

4:Duplex unit

PS ERROR mn			Cause: A PostScript error
			Solution: If the error recurs, consult your
			dealer for service.
Source PAPER		OUT	Cause: Paper out in the specified paper
			source
			Solution: Supply paper.
STACKER FULL			Cause: Paper stacker full
			Solution: Remove paper from the paper
			stacker.
SYSTEM	ERROR	n	Cause: A system error on the controller
			board
			Solution: If the error recurs, consult your
			dealer for service.
TRAYn	MISS SET		Cause: Paper tray installed incorrectly
			Solution: Install the paper tray.
TONER	EMPTY		Cause: Toner runs out.
			Solution: Replace toner bottle and heat
			roller cleaner.

User’s Manual 5-15