HP 16V Remove the rear paper guide from the tray, Change the setting of the paper size indicator, 4 . Attach the rear paper guide to the correct position

Handling Paper

2.Change the setting of the paper size indicator. Lift the right end of the indicator and slide it to the desired position, that is, adjust the triangle mark to A4, A5, LTR, or EXE engraved on the tray.

3.Remove the rear paper guide from the tray. Push the two catches inward to release the pins from the holes and remove the rear paper guide from the tray.

4 . Attach the rear paper guide to the correct position.

Refer to the label or engraving on the tray to locate the holes of the desired paper size.

Push the two catches inward to put the three projections into the bottom holes then the two pins into the side holes.

User´s Manual 2-27