Installing an Interface Expansion Board

Installing an

The printer’s standard interfaces are

parallel (Centronics x 2) and

Interface

serial (RS-232C x 1). The currently

available optional

interfaces are

Expansion Board

LocalTalk and Ethernet. If the location of your printer

is distant

 

from the computer, you can use the

LocalTalk port or Ethernet port

 

of the computer to connect your printer. Fujitsu offers the optional

 

LocalTalk board and Ethernet board C for these purposes.

 

 

 

 

 

Notice:

 

 

 

When sharing the printer among multiple computers, setting the I/O

 

time-out short may cause a printing

problem.

 

 

 

 

 

LocalTalk interface board

Ethernet interface board

Installing an Interface Board

Remove the cover

 

1. To install an interface

 

I

board, first make sure

the

or-inter is turned off.

 

 

Remove the interface

board

 

slot cover from the back

 

right of the printer.

 

2.Hold the board with the parts mounting side left. Slide the board into the empty interface slot using the guides, and push it until it stops. Secure the board by the two screws supplied with it.

User’s Manual

3-5