Setting Up
5. Prepare a paper stack.Prepare paper of the size indicated by the size label
(*). Fan the paper stack both ways to prevent sheets from sticking together.
Notice:
Put the paper stack in the paper tray with the printing side faced down.
If paper is curled, remove the curl.
6. Load the paper. Place the front portion of the paper stack on the tray and slide it backwards so that the stack is placed under the two stoppers. Gather the edges of the stack together to ensure correct positioning of paper in the tray.
Make sure the stack does not exceed the limit mark.
7. Adjust the side guides. Push the outer PUSH mark of either side guide to the width of paper. Align the rear edges of the paper stack.
Bad placement
Good placement
User’s Manual |