Adding Duplex Unit

To print data using the duplex unit with the printer in the FPS emulation, the total capacity of printer’s RAMS must be 10M bytes or more. Insufficient capacity restricts some functions.

To install and use the duplex unit, refer to its User’s Manual.

Caution:

To avoid possible personal injury or harm to your equipment, cooperate with another person in assembling or disassembling the printer, duplex unit, multi-function feeder, and paper feeder (if installed). Do not lift or move the printer as equipped with other units.

Notice:

Be sure to keep the rear opening of the duplex unit away from a wall or another equipment so as to open the rear unit for clearing paper jam or not to block the reverse operation of paper that comes out and in the opening during two-sided printing.

With the optional paper feeder (tray 2), the duplex unit must be installed between the printer and the paper tray.

Duplex unit

3-14

User´s Manual