Periodic Routine Maintenance
Important:
Whenever you replace the toner bottle, clean the corona wire and the precharger wire to prevent a degradation in print quality.
You can continue to print after the toner low status if the print quality is still satisfactory. However, you must at least prepare a new toner bottle.
To replace the toner bottle, follow these steps:
1. Open the upper door.2. Tap the toner bottle. Tap the toner case to drop any remaining toner from toner bottle into print unit. This avoids the remaining toner from being spilt inside the printer during replacement.
3. Unlock and remove the old toner bottle. Pull the top of the toner bottle toward you to swing bottle from the upright position to the removable position. Gently remove the bottle. If necessary, clean toner around the toner hopper entry of the print unit.
Notice:
Be careful not to allow dust or foreign matter into the toner hopper.
User’s Manual | |
|
|