Adding Paper Sources
The procedure below applies to the
To make the connection, firmly plug the cable connector into the Ethernet interface port on the back right of the printer. Secure the connector by turning the connector hood. Plug the other connector into a networks Ethernet port. Consult your computer documentation if you need help.
Selecting the Ethernet Interface
The printer’s standard interfaces are parallel and serial. While the Ethernet interface board is installed, the printer automatically detects that the computer is using the Ethernet interface.
Ethernet Specifications
The table below shows the physical specifications of the Ethernet interface.
Specification
The span of
The span of
Speed of data transmission
Description
Max. 185 meters (coaxial, bus connection) Max. 100 meters
Adding Paper | Paper Feeder |
Sources | If you switch paper sizes frequently, you may want to add a second |
| |
| paper source. Or you may simply wait to increase the paper capacity |
| of your printer. You can easily do this by installing an optional paper |
| feeder which consists of a base frame and a paper tray. The paper tray |
| in the paper feeder is identified as tray 2 and the one in the basic |
| configuration is identified as tray 1. |
| The paper types and sizes used by tray 2 are the same as those for the |
| standard paper tray. The capacity is 500 sheets of 0.09 mm thick |
| paper, twice that of the standard paper tray. |
User’s Manual |