Reduce or Enlarge Copies

The HP Color Copier 210 contains predefined settings for reducing and enlarging copies. Using these settings, you can enlarge standard photograph sizes to letter/A4, or take advantage of a special feature called Auto Fit.

Auto Fit does a pre-scan of the item on the glass and automatically sizes it to fit the current copy paper size. The pre-scan makes Auto Fit a bit slower than the standard copy procedure, but it ensures that the edges of your original always appear on the copy.

NOTE To copy successfully using Auto Fit, you must place all originals, including small photographs, in the corner along the two green borders.

When enlarging, Auto Fit enlarges the item to the largest size that can fit on the page without distorting the image.

NOTE If the list of photograph sizes (e.g., 4x6 → Ltr or 13x20cm → A4) doesn’t look familiar, verify that the correct copy paper size has been set for your copier. Refer to “Change Copy Paper Size” later in this chapter.

1Press the Reduce/Enlarge button.

2To scroll through the list of settings, press the Plus (+) or Minus (–) buttons. Refer to the Help Card for the list of options.

3-4Copying