TE (Text Enhancement)

The TE (Text Enhancement) setting sharpens the edges of black text. It should be turned on in most situations. Turn off TE if

✦stray dots of color surround some text

✦large, black typefaces have a splotchy (not smooth) appearance

✦thin, colored objects or lines contain black spots

1With TE displayed on the front panel display, use the Plus (+) and Minus (–) buttons to cycle between o (off ) and ● (on).

2To confirm your selection, press Select/Resume.

ELC (Enhance Light Colors)

Use ELC (Enhance Light Colors) to copy very pale colors. Turn on ELC if very pale colors are printing as white.

1With ELC displayed on the front panel display, use the Plus (+) and Minus

(–) buttons to cycle between o (off) and ● (on).

2To confirm your selection, press Select/Resume.

Setting Defaults

If you consistently use a setting on the front panel other than the default, you can establish that setting as the default.

NOTE The default setting is always indicated by a black dot (●).

For example, to set Reduce/Enlarge to Auto Fit, follow these steps:

1Press the Reduce/Enlarge button until Auto Fit is displayed, and then press Select/Resume.

2Press the Menu button until Set Defaults is displayed.

3Press Select/Resume. Current settings saved as defaults is displayed.

3-8Copying