Installing a Copy Controller

1Turn off the HP Color Copier 210.

2Plug the copy controller into the port in the back of the HP Color Copier 210.

3Turn on the copy controller and then the HP Color Copier 210.

4Press the menu button untilCopy Controlleris displayed on the front panel display.

CAUTION After you have activated a copy controller, you will be able to make copies only if the copy controller is attached.

5To activate the copy controller, press Select/Resume.

6To confirm, press Select/Resume again. Pressing any other key will cancel activating the copy controller.

Using a Copy Controller

After a copy controller has been activated, the only way to make copies is through the copy controller. If a person tries to make a copy without using the copy controller, the following message will appear:

Cannotcopy.Accessthroughcopycontroller.

If the copy controller is turned off, disconnected, or otherwise disabled, the following message will appear:

Cannot copy. Copy controller disconnected.

5-2Copy Access Controllers