3Insert the installation CD that was supplied with the HP JetDirect into your computer's
You will use this CD to locate the HP JetDirect on the network.
4Select Install to run the HP JetDirect installer.
5When prompted, insert the HP
Note If you are performing an initial installation of your HP
HP JetDirect 175x, do not run the HP
If you decide at some later date to connect your HP
6Follow the steps appropriate for your operating system:
If you are using Windows XP or 2000:
a Browse to the root directory of the CD and select the correct driver .inf for your HP
The printer driver file, located in the root directory, is hpoprn08.inf.
If you are using Windows 98 or ME:
a Browse the CD for the "Drivers" folder and find the correct language subfolder. For example, for English speaking customers, navigate to the \enu\drivers \win9x_me directory, where enu is the English language directory and win9x_me is for Windows ME. The printer driver file is hpoupdrx.inf.
b Repeat for each of the drivers required.
7Complete the installation.
To network connect your HP
1Follow the HP JetDirect 175x setup instructions to connect the print server to a LAN.
2Connect the HP JetDirect to the USB port on the rear of your HP
3Do one of the following:
–If you are performing an initial installation of your HP
The network support software for your computer is installed at this time. When the installation is finished, the HP
–From the Disk Drive, open the HP
The HP
4Follow the onscreen prompts and provide the information requested. Note Make sure you click TCP/IP Network on the connection screen.
information Connection
User Guide | 21 |