Note If you need more control over print settings than the proof sheet provides, you can print photos directly from the control panel. For more information, see Print photos directly from a memory card.

Scan a proof sheet

The final step in using a proof sheet is to scan the completed sheet you have placed on the scanner glass.

Tip Make sure the glass of the HP all-in-one is completely clean or the proof sheet might not scan properly. For more information, see Clean the glass.

1Load the proof sheet face down on the right front corner of the glass. Make sure the sides of the proof sheet touch the right and front edges. Close the lid.

2Load 10 by 15 cm ((4 by 6 inch)) photo paper loaded in the input tray. Make sure the same memory card you used to print the proof sheet is still in the slot when you scan that proof sheet.

3In the Photo area, press Proof Sheet, and then press 2.

This displays the Proof Sheet Menu and then selects Scan Proof Sheet. The HP all-in-one scans the proof sheet and prints the selected photos.

Set photo print options

From the control panel, you can control how your HP all-in-one prints photos, including paper type and size, layout, and more.

This section contains information on the following topics: setting photo print options, changing print options, and setting new photo print option defaults.

PictBridge and Card Memory

User Guide

41