To copy a two-page document from the control panel

1Make sure you have paper loaded in the paper tray.

2Load the first page of your original face down on the right front corner of the glass.

3Press Copy, if not already lit.

4Press Start Copy Black.

5Remove the first page from the glass and load the second page.

6Press Start Copy Black.

Make a 10by 15cm (4by 6inch) borderless copy of a photo

For the best quality when copying a photo, load photo paper in the paper tray and change your copy settings for the correct paper type and photo enhancement. You might also want to use the photo print cartridge for superior print quality. With the tricolor and photo print cartridges installed, you have a six-ink system. For more information, see Use a photo print cartridge.

To copy a photo from the control panel

1 Load 10 by 15 cm (4 by 6 inch) photo paper in the paper tray.

Warning In order to make a borderless copy, you must have photo paper (or other specialty paper) loaded. If the HP all-in-one detects plain paper in the input tray, it will not make a borderless copy. Instead, your copy will have borders.

2Load your original photo face down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass.

3Press Copy Menu.

This displays the Copy Menu.

4Press 2, and then press 3.

This displays the Reduce/Enlarge menu, and then selects Fill Entire Page.

5Press Start Copy Color.

The HP all-in-one makes a 10 by 15 cm (4 by 6 inch) borderless copy of your original photo, as shown below.

features copy the Use

User Guide

53