Memory Card and PictBridge

Chapter 6

You access and set photo print options from the Photo Menu available through the control panel.

Tip You can also use the HP Image Zone software to set photo print options. For more information, see the HP Image Zone Help.

Use the print options menu to set photo print options

The Print Options menu gives you access to a variety of settings that affect the way photos print, including number of copies, paper types, and more. The default measurements and sizes vary according to country/region.

1Insert a memory card into the appropriate slot on your HP all-in-one.

2In the Photo area, press Photo Menu. The Photo Menu appears.

3Press 1 to access the Print Options menu, and then press the number next to the setting you want to change.

SettingDescription

1.Number of Copies Lets you set the number of copies to be printed.

2. Image Size

Lets you set the size at which you want the image

 

printed. Most choices are self-explanatory, but two

 

require some explanation: Fill Entire Page and Fit to

 

Page.

 

The Fill Entire Page setting scales the image to cover

 

all of the output paper without any white border area.

 

Some cropping may occur. Fit to Page scales the image

 

to cover as much of the page as possible while keeping

 

the original aspect ratio without cropping. The image is

 

centered on the page and is surrounded by a white

 

border.

 

 

3. Paper Size

Lets you select the paper size for the current print job.

 

The Automatic setting defaults to a large (letter or A4)

 

and small 10 by 15 cm (4 by 6 inch) paper size that

 

varies by country/region. When Paper Size and Paper

 

Type are both set to Automatic, the HP all-in-one

 

selects the best print options for the current print job.

 

The other Paper Size settings let you override the

 

automatic settings.

 

 

4. Paper Type

Lets you select the paper type for the current print job.

 

The Automatic setting lets the HP all-in-one detect and

 

set the paper type automatically. When Paper Size and

 

Paper Type are both set to Automatic, the HP all-in-

 

one selects the best options for the current print job. The

 

other Paper Type settings let you override the automatic

 

settings.

42

HP PSC 2350 series all-in-one