Chapter 1

Printer menu structure●Print Options

–Panoramic photos: Select to turn panoramic printing On or Off (default). Select On to print all selected photos with a 3:1 aspect ratio; load 4 x 12 inch (10 x 30 cm) paper before printing. When a photo is selected, a green crop box shows the area to be printed. Other Print Options menu choices will be disabled when this option is turned on. Select Off to print with a normal 3:2 aspect ratio. Panoramic printing mode is not supported when printing directly from a PictBridge camera using a USB cable.

–Photo stickers: Select to turn sticker printing On or Off (default). Select On to print 16 photos per page; load special sticker media if desired. Other Print Options menu choices will be disabled when this option is turned on. Select Off to print using one of the normal layout options.

–Print passport photos: Select to turn passport printing On or Off (default).

Select size: Passport printing tells the printer to print all selected photos in the selected passport photo size. A separate page is printed for each selected photo. Each printed page contains the number of photos of the selected size that will fit on the page. Other Print Options menu choices will be disabled when this option is turned on.

●Tools

–Print quality: Normal uses less ink than Best (default) and applies only to the current print job. The setting then automatically resets to Best.

–Print sample page: Select to print a sample page, which is useful for checking the print quality of the printer.

–Print test page: Select to print a test page containing information about the printer that can help in troubleshooting problems.

–Clean cartridge: Select to clean the print cartridge. After cleaning, you'll be asked if you want to continue to a second-level cleaning (choose Yes or No). If you choose Yes, another cleaning cycle will be completed. Next you'll be asked if you want to continue to a third-level cleaning (choose Yes or No).

–Align cartridge: Select to align the print cartridge.

●Bluetooth: The Bluetooth menu options are needed if you equip the printer with the optional HP Bluetooth wireless printer adapter.

–Device address: Some devices with Bluetooth wireless technology require you to enter the address of the device they are trying to locate. This menu option shows the device address.

–Device name: You can select a device name for the printer that appears on other devices with Bluetooth wireless technology when they locate the printer.

–Passkey: You can assign a Bluetooth numerical passkey to the printer. The default passkey is 0000. When the Security level is set to High (see Security level later in this table), users of devices with Bluetooth wireless technology must enter this passkey before they can print.

–Visibility: You can set the Bluetooth-equipped printer to be visible or invisible to other devices with Bluetooth wireless technology by changing this visibility option. Select Visible to all or Not visible. When Not visible is selected, only devices that know the device address can print to it.

–Security level: Select Low or High. The Low (default) setting does not require users of other devices with Bluetooth wireless technology to enter the

10

HP Photosmart 330 series