CAUTION

CAUTION

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide

Checking the Installation

If a service pack was already installed on the PC before the network interface card was installed, the service pack must be reinstalled.

On some platforms you also need to reinstall your video drivers. Check your PC documentation for more information.

Updating the Driver

If you already have the 3C905B-TX network driver and want to update it, follow the instructions provided below.

1Install the network interface card and connect it to the network as described earlier.

2Restart the PC and start Windows NT.

3In the Control Panel, double-click on Network.

4In the Network window, double-click on the Adapter item.

5Select 3Com EtherLink XL NIC.

6Click on Update.

7Insert EtherDisk diskette #2. The driver will be automatically updated.

If a service pack was already installed on the PC before the network interface card was installed, the service pack must be re-installed.

On some platforms you also need to reinstall your video drivers. Check your PC documentation for more information.

Checking the Installation

Test whether the card functions on the network by finding another network device or performing a network operation. If it does not work correctly, refer to the “Troubleshooting” section that follows.

English 13