HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide

Software Installation Procedure

5Double-click on Network Adapters. The name of the installed network interface card appears:

3Com EtherLink XL Adapter (3C905B).

If this name does not appear or if a yellow exclamation mark appears next to it, follow this troubleshooting procedure:

a In the Device Manager window, double-click on Other Devices. b Click PCI Ethernet Controller or the duplicate

3C905B-TX NIC entry. c Click on Remove.d Restart your PC.Software Installation and Update on a Windows NT 4.0 System

This section describes how to install the network driver in a PC workstation running Windows NT version 4.0. Before you begin, obtain EtherDisk diskette #2 and Windows NT installation files (stored under C:\I386 on systems preloaded with Windows NT 4.0).

If Windows NT networking is not installed, you may also need the following information from your MIS department:

•Whether you are on a LAN or are connecting to one through a modem

•The protocol used in the Microsoft Windows Network (typically TCP/IP or NetBEUI)

•The name of the Windows NT server domain or workgroup you belong to•Your IP address if you are not using DHCP

English 11