Web-based printing
Several options are available for remote printing over the Internet. For more information about these options, see the support Web site for this product.
HP ePrint
Use HP ePrint to print documents by sending them as an email attachment to the product's email address from any email enabled device.
To use HP ePrint, the product must meet these requirements:
●The product must be connected to a wired or wireless network and have Internet access.
●HP Web Services must be enabled on the product, and the product must be registered with HP Connected.
1.From the Home screen on the product control panel, touch the Web Services
button.
2.Touch the Enable Web Services button. The product enables Web Services, and then prints an information page.
The information page contains the printer code that you use to register your HP product at HP Connected.
3.Go to www.hpconnected.com to create an HP ePrint account and complete the setup process.
For more information, go to www.hp.com/support to review additional support information for your product.
HP ePrint software
The HP ePrint software makes it easy to print from a desktop or laptop computer to any HP
For Windows, the HP ePrint software also supports traditional direct IP printing to local network printers on the network (LAN or WAN) to supported PostScript® products.
Go to www.hp.com/go/eprintsoftware for drivers and information.
NOTE: The HP ePrint software is a PDF workflow utility for Mac, and is not technically a print driver. HP ePrint software for Mac supports print paths only through HP Connected and does not support direct IP printing to local network printers.
40 Chapter 3 Print | ENWW |
