3.If you are loading B4, A3, 11 x 17, Legal, or Oficio 8.5 x 13 size paper, unlock the rear tray guide using the slide lock at the back of the tray.
4.Adjust the tray length to the correct paper size.
5.Load paper into the tray. Check the paper to make sure the guides lightly touch the stack, but do not bend the paper.
The way you should orient the paper in the tray varies depending on the paper size. For additional information, see Tray 2 paper orientation on page 21.
NOTE: To prevent jams, do not overfill the tray. Be sure the top of the stack is below the tray full indicator.
NOTE: If the tray is not adjusted correctly, an error message might display during printing or the paper might jam.
ENWW | Load Tray 2 19 |
