Chapter | HP 4110v, 4110xi specification

chapter 3

3Tap the stack on a flat surface to align the edges of the paper, and then check the paper for the following:

–Make sure it is free of rips, dust, wrinkles, and curled or bent edges.

–Make sure all the paper in the stack is the same size and type, unless you are working with photo paper.

4Insert paper into the paper tray print-side down until it stops. To avoid bending the paper, make sure you do not push the paper in too far, or push too hard. If you are using letterhead, insert the top of the page first.

Be careful not to use too much or too little paper. Check that the stack of paper contains several sheets but is no higher than the top of the paper- width guide.

5Slide the paper-width guide in until it stops at the edge of the paper. Make sure that the paper stack lies flat in the paper tray and fits under the tab of the paper-width guide.

6Extend the output-tray.

8	hp officejet 4100 series

Image 12

HP 4110v, 4110xi manual Chapter

Contents

Hp officejet 4100 series all-in-one Reference guide Safety information Copyright Hewlett-Packard Company Contents Index Get help Help Description Chapter Front panel features Quick startButton Purpose Use your hp officejet with a computer Review the hp photo & imaging director Feature Feature Purpose Load originals and load paper Load originalsLoad paper Chapter Load envelopes Load 4 x 6 inch photo paper Load postcards Tips for loading other types of paper in the paper tray Paper Tips Set the paper type Set the paper size Use the copy features Make copiesMake a copy Increase copy speed or quality Set the number of copies Reduce or enlarge a copyMake copies lighter or darker Enhance text sharpness and photo colors Change settings for all copy tasks Perform special copy jobsCopy a photo Copy options Fit a copy to Use the scan features Scan an original Stop scanning Use the fax features Change settings and use speed dials before sending a faxSend a fax Send a fax from your hp officejet Send a color fax Schedule a fax Cancel a scheduled fax Receive a faxSet the number of rings before answering Receive a fax manually Control resolution and contrast Change resolutionPrint reports Generate reports automatically Change other fax settings Press Enter to accept the setting you selectedChange contrast Redial a number automatically Edit or cancel fax forwarding Forward faxes to another number Use error correction mode Adjust the volumeSet automatic reduction Set up speed dialing Create individual speed-dial settingsChange the answer ring pattern distinctive ringing Set basic fax settings using the front panel Delete speed-dial settingsSet the date and time Set the fax header Enter text Check for dial tone Setup menu for fax commands Following fax settings are available in the Setup menuFax job menu Chapter Clean the glass Maintain your hp officejet Clean the white strip Clean the exteriorWork with print cartridges Print a self-test report Replace the print cartridges Chapter Restore factory defaults Clean the print cartridgesAlign the print cartridges Set the prompt delay time Self-maintenance soundsSet scroll speed Setup menu options Following options are available from the Setup button Chapter Additional setup information Possible installation problems Remove and reinstall your hp officejet software Additional setup information Additional troubleshooting help Technical information Doc statement / déclaration de conformité Canada Geräuschemission Call in the U.S. during warranty Hp support Call elsewhere in the world Country/region Hp technical support Call in Australia post-warranty Prepare your unit for shipment Hp officejet 4100 series Hp distribution center Chapter Warranty information Express serviceExtent of limited warranty Limitations of warranty Limitations of liabilityLocal law Reference guide Chapter Index Numerics Hp officejet 4100 series Page Chapter Declaration of conformity Q1608-90163 Order mediaOrder print cartridges Print cartridges Hp reorder number