HP 4110v, 4110xi manual Clean the white strip, Clean the exterior, Work with print cartridges

chapter 7

clean the white strip

Minor debris can accumulate on the white strip located underneath the scanner’s lid.

1Turn off the unit, unplug the power cord, and raise the scanner lid.

2Clean the white strip with a soft cloth or sponge slightly moistened with a mild soap and warm water.

3Wash the strip gently to loosen debris; do not scrub the strip.

4Dry the strip with a chamois or soft cloth.

Caution! Do not use paper-based wipes as these may scratch the strip.

5If this does not clean the strip well enough, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the strip thoroughly with a damp cloth to remove any residual alcohol.

clean the exterior

Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the case. The interior of the unit does not require cleaning. Keep fluids away from the interior of the unit as well as the front panel.

work with print cartridges

To ensure the best print quality from your HP Officejet, you will need to perform some simple maintenance procedures, and when prompted by a front-panel message, replace the print cartridges.

print a self-test report

If you are experiencing problems with printing, before cleaning or replacing the print cartridges, you should print a Self-Test Report. This report provides useful information about your print cartridges, including status information.

1Press Setup.

2Press 1, then press 4.

This selects Print Report, and then selects Self-Test Report.

3Press Start Black or Start Color.

A Self-Test Report is printed for your HP Officejet.

handle print cartridges

Before you replace or clean a print cartridge, you should know the part names and how to handle the print cartridge.

32 hp officejet 4100 series