HP 441877-00F manual Adapter configurations

2.Execute the following command to disable PXE functionality: nxflash -i NX_NIC<Device #> --opt-rom-off

Complete the following steps to enable or disable PXE functionality for Linux.

1.Execute the following command to enable PXE functionality: nxflash -i eth<#> --opt-rom-on

2.Execute the following command to disable PXE functionality: nxflash -i eth<#> --opt-rom-off

Currently, the PXE interface for NC51xx adapters DOES NOT support the Proliant Essentials Rapid Deployment Pack (RDP).

Adapter configurations 28