•HP NC373i Multifunction Gigabit Server Adapter
•HP NC373m Multifunction Gigabit Server Adapter
The ccfwupg2.bat command upgrades the Boot Code and Option ROM firmware image on the following
•HP NC326i PCIe Dual Port Gigabit Server Adapter
•HP NC326m PCIe Dual Port Gigabit Server Adapter
•HP NC325m PCIe Quad Port Gigabit Server Adapter Upgrading firmware
To upgrade the boot code and Option ROM image on the adapter, complete the following:
1.Download and extract the HP SoftPaq as described in "Downloading files (on page 9)."
2.Copy all files and folders from the \apps\ccfwupg\ccfwupg1 directory or the \apps\ccfwupg\ccfwupg2 directory to a bootable diskette or USB drive.
3.Boot to DOS using the diskette.
4.Type ccfwupg1.bat or ccfwupg2.bat and press the Enter key. A confirmation message displays when the upgrade is complete.
HP NC-Series NetXen Online Firmware Upgrade Utility
The HP
NOTE: Driver and firmware compatibility must be maintained to ensure proper functionality. Make sure that the driver and firmware versions match for this release.
The HP
NOTE: Driver and firmware compatibility must be maintained to ensure proper functionality. Make sure that the driver and firmware versions match for this release.
1.Click the sp#####.exe file to run the
2.Navigate to where the files were downloaded. Ensure that the following binaries are located in the directory.
nxflash.exe
nxudiag.exe
cx4_hp_romimage xfp_hp_romimage hmez_romimage
3.To upgrade the firmware for a specific adapter, launch the nxflash.exe by typing the following command line syntax in a DOS command window:
nxflash
Firmware upgrade utility 22
