•Test aborted by user
•Tx DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x
•Rx DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x
•Tx DMA failed
•Rx DMA failed
•Data error, got 0x%08X at 0x%08X, expected 0x%08X
•Second read error, got 0x%08X at 0x%08X, expected 0x%08X
•Failed writing EEPROM at 0x%04X
•Failed reading EEPROM at 0x%04X
•EEPROM data error, got 0x08X at 0x04X, expected 0x%08X
•Cannot open file %s
•Invalid CPU image file %s
•Invalid CPU image size %d
•Cannot allocate memory
•Cannot reset CPU
•Cannot release CPU
•CPU test failed
•Invalid Test Address Range
•Valid adapter address is
•DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x
•Unsupported PhyId %04X:%04X
•Too many registers specified in the file, max is %d
•Cannot write to VPD memory
•VPD data error, got %08X @ 0x04X, expected %08X
•No good link! Check Loopback plug
•Cannot TX Packet!
•Requested to Tx %d. Only %d is transmitted
•Expected %d packets. Only %d good packets are received
•%d unknown packets have been received
•%d bad packets have been received
•%c%d is an invalid Test
•EEPROM checksum error
•Error in reading WOL/PXE
•Error in writing WOL/PXE
•No external memory detected
•DMA buffer %04X is large, size must be less than %04X
